datasheet | august 2012 fiber optics | rev 2012.08 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications high performance supertrunking links high power distri bution networks redundant ring architectures fttx networks features full function edfa gain block (preamp) low noise figure (typ < 5.0 db) total input power range: -30 dbm to - 15 dbm +13 dbm saturated output power standard rs-232 communication key lock switch low electrical power consumption output isolation > 40 db polarization dependent gain < 0.1 db polarization mode dispersion < 0.5 ps mafa 2000 series erbium doped fiber micro preamplifier emcore?s mafa 2100 pa series erbium doped fiber preamplifier is an ideal building block for oem system integrator s. the family of mafa 2100 pa series preamps is designed to meet the most demanding noise performance requirements of any fiber links applications, and performs all the functions required of an optical preamplifier for sy stem integration. mafa 2100 pa series provide optical isolation on the output of the gain block for stable, low noise operation. the output optical signal power levels are detected for monitoring and control. the mafa 2100 pa series also provides monitors and associated alarms for all vital characteristics. optical/electrical characteristics 1 property unit limit model comments 2114 ? pa operating input power pin (dbm) max -15 - operating input power pin (dbm) min -30 - saturated output power po(dbm) min 13 - operating wavelength range nm min/max 1530 ? 1562 nominal noise figure nf (db) typ/max 5/5.5 (note 2) power consumption psys (w) max 8 +85 o c case output rin rinout max -170 db/hz input rin <-175 db/hz notes: 1. unless stated otherwise a ll specifications apply over the full temperature range and humidity 2. measured @ 1550 nm, pin -25 dbm and @ 25 o c mafa 2100 pa series
datasheet | august 2012 fiber optics | rev 2012.08 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. general and mechanical specifications property requirement comments operating wavelength 1530 nm ~ 1562 nm standard operating case temperature -40 ? c to 85 ? c standard storage temperature -40 ? c to 85 ? c standard operating humidity 20% to 85% non-condensing voltage supply range +4.5v to +5.5vdc standard optical connectors sc/apc; sc/upc; fc/apc; fc/upc; e2000/apc user specified dimensions (in) 4.9?w x 5.9?d x 0.8?h mafa 2014 -pa outline drawing mafa 2100 pa series
datasheet | august 2012 fiber optics | rev 2012.08 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. electrical connector pinout pin # designation pin # designation 1 dc power input (+5v) 16 reserved 2 gnd 17 reserved 3 reserved 18 rs-232 rx* 4 reserved 19 reserved 5 key-switch 20 reserved 6 rs-232tx 21 reserved 7 reserved 22 reserved 8 reserved 23 reserved b 9 reserved 24 n/a 10 reserved 25 reserved 11 reserved 12 reserved 13 reserved 14 dc power input (+5v) 15 gnd compliance and reliability information fcc: subpart b. part 15 class ?a?: unintentional radiators en 61000-4-3: electromagnetic compatibility (emc) part 4: testi ng and measurement techniques ? section 3: radiated immunity (1996) en 55013: sound and television broadcast receivers and associated equipment ? radio disturbance characteristics- limits and methods of measurements ? electric field radiation emissions (2001) fit rate: 60% level of confidence 670 @ 25 ? c fit rate: 60% of level of confidence 962 @ 40 ? c ordering information mafa2014 - - pa connector option sc - sc/apc fc - fc/apc ec ? e2000/apc tc ? sc/upc gc ? fc/upc mafa 2100 pa series
|
